Genisision

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

Engineering, Project and Decision Making Services

Address
PO Box 2079,
Fountain Gate,
Victoria 3805,
Australia
Phone
Fax Number
Share

Genisision is an Australian company focused on decision-making, engineering and project services.

With an international network of engineers, planners, system analysts and decision making specialists, the company serves clients safely and efficiently in the global markets of resources, power, construction and refinery.

Genisision specialises in capital projects and the associated services, which span conceptual design to start up and operations with experience that ranges through every environment in both green and brown fields. The company’s internal systems, products and services provide a consistent approach to all areas of work that ensures the client receives what they need in a timely and well communicated manner.

Genisision Services

Genisision’s Power group can assist with front end loading design and vendor selection for switchgear, transformers, cables, diesel and gas turbine, in addition to substation construction, testing, fault location and online monitoring services, and asset management and operations services.

Genisision is an Australian company.
Four-stage compressor assembly.
Central planning room.
FG system.
High-pressure scrubbers.
HV cable termination.
Lube oil.
TEG.
TEG.

Power capabilities include:

  • Testing, fault location and online monitoring services
    • Rotating machines (insulation and stator windings)
    • Power, distribution and instrument transformers (Insulation, bushings, windings, cables, tap changers) – testing and monitoring
    • Switchgear (Insulation integrity and continuous monitoring) PD, Tan Delta
    • Cable withstand and partial discharge testing (AC, DC, Tan Delta)
    • Bushings, spacers and insulators (integrity test)
    • Cable fault location techniques
    • Earth resistivity testing
  • Substation construction services
    • Fire-rated building construction or modifications
    • Dehumidification and temperature control construction and modifications
    • Fire and gas detection and suppression systems
    • Cable, switchgear and transformer selection, purchase, installation, testing and commissioning
    • Overhead line design
    • SCADA system interfacing
  • Asset management and operations:
    • Control centre programming and maintenance
    • Asset hierarchy with criticality and failure rate determination
    • Operation procedures and maintenance manuals

Project Services include:

  • Management
  • Planning
  • Scheduling
  • Project and field engineering
  • Construction management
  • Completions management and process
  • Commissioning management and process
  • Oil and gas pipelines and associated infrastructure
  • Technology support

Engineering services include:

  • Management
  • Planning
  • Scheduling
  • Project and field engineering
  • Conceptual and design engineering
  • Process engineering: oil and gas, and LNG
  • Project engineering and management in both green and brown fields

Decision-making products and services include:

  • Calgeni decision-making software
  • Online training
  • Face-to-face training
  • Consulting
  • Decision-making workshops, courses and seminars
  • After-sales support

Speciality codes and certificates:

  • Pressure vessels fabricated to ASME DIV VIII
  • Pipeline fabrication to AS 2885.1
  • Corrosion protection and management according to AS 2885.3

Genisision case study: Australia Pacific LNG

Senior engineers and project managers lead the Completions team on various sites throughout the project (QLD, Australia). Their outstanding ability to perform successfully as a team was quickly realized through the completion of day-to-day tasks, including the following areas of work:

Civil, structural, mechanical and piping (CSMP) field inspection checks, electrical and instrumentation (EandI) field inspection checks, punch lists, tri-party walk downs, mechanical completions dossier for CSMP and EandI systems, quality assurance, project controls and scheduling.

Dossier delivered by system, including Redline mark-ups and construction activities completed by area.

On the boarder Project Scope Completions team completed essential milestones, including the Verification of Construction to Design by:

  • Field inspection check close-out facilitation and structures
  • Punch lists close-out facilitation including risk reviewing and construction team procedure
  • Tri-party walk-down structure and execution
  • Mechanical completions dossier delivery by sub-system priority
  • Redline procedure and progress towards drawing office structure
  • Hazardous area close-out facilitation and dossier delivery
  • Quality assurance assistance
  • Project controls and scheduling assistance

Health and safety commitments for offshore conditions

Genisision also recognises its moral and legal responsibilities under occupational health and safety legislation to provide a safe and healthy work environment.

We have made the following commitments:

  • Provide a safe and healthy workplace for all, including employees, contractors, customers and visitors
  • Provide training to enable all employees to work safely
  • Comply with all relevant legislation and industry standards
  • Provide support and assistance to employees
  • Consult with staff and contractors where relevant to enhance the effectiveness of procedures
  • Provide adequate resources to aid employees in fulfilling their responsibilities
  • Conduct investigations into all reported incidents
  • Ensure that appropriate return-to-work programmes are in place
  • Conduct regular reviews and evaluations of the health and safety systems in place

Our commitment to our employees, irrespective of their position, means that we will:

  • Take reasonable care to ensure good health and safety procedures are implemented at all times
  • Identify and support measures to eliminate or minimise unsafe conditions
  • Assume personal responsibility for our own safety and for those of our colleagues by always operating in a safe and appropriate manner

Quality guarantees for the oil and gas industry

Quality is a cornerstone of our business and we strive to provide our customers with products and services that exceed their expectations and standards. We are committed to continuous improvement and have established a quality management system, which provides a framework for measuring and improving our performance.

We have the following systems and procedures in place to support our aim of total customer satisfaction:

  • Regular gathering and monitoring of customer feedback
  • A customer comments procedure
  • Selection and performance monitoring of suppliers against set criteria
  • Training and development for our employees
  • Regular audit of our internal processes
  • Measurable quality objectives, which reflect our business aims
  • Management reviews of audit results, customer feedback and complaints

Our internal procedures are reviewed regularly and are codified in a quality manual, which is made available to all employees.

Environmental practices for offshore operations

Genisision recognises its moral and legal responsibilities under environmental legislation.

We have made the following environmental commitments:

  • Minimise waste by evaluating operations and ensuring they are as efficient as possible
  • Minimise toxic emissions through design and equipment selection
  • Actively promote recycling both internally and amongst its customers and suppliers
  • Source and promote a product range to minimise the environmental impact of both production and distribution
  • Meet or exceed all the environmental legislation that relates to the company
  • Use an accredited programme to offset the greenhouse gas emissions generated by our activities

Press Releases

  • Defining the Box for Creative Engineering

    Defining, a concrete and factual-based analysis, appears to conflict with the word creative in most cases, yet for engineering and communications, it is the underlying imperative.

Address
Genisision Pty Ltd – Decision Making Specialists
PO Box 2079
Fountain Gate
Victoria 3805
Australia

Email address
Phone
Fax Number