SAFETYTAINER

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

ATEX Active Safety IEFS Groups

SAFETYTAINER safety modules are designed to ensure that equipment is protected in areas where explosive atmospheres can be caused by flammable gas, vapour, mist or combustible dust.

Address
3 Allée Alain Colas,
13500 Martigues,
France
Phone
Fax Number
Share

SAFETYTAINER safety modules are designed to ensure that equipment is protected in areas where explosive atmospheres can be caused by flammable gas, vapour, mist or combustible dust. The company’s modules, built according to ATEX directives, are designed for use on offshore production platforms, drilling rigs and in refineries and SEVESO areas.

SAFETYTAINER’s new integration of equipment and functionalities of ATEX safety (IEFS) groups supply ATEX protection functionalities to any new or existing shelter, after certification of the complete system. Each individual shelter is designed according to the hazard level on-site.

Offshore safety modules

The company’s IEFS group consists of the following.

Fresh air (outside the shelter):

Simple ventilation.
Double ventilation.
Command control skid inside the shelter.
  • Fresh air drawing within safe zone
  • Ventilation and pressurisation in normal operation
  • Sweeping when ATEX safety commissioning
  • Fresh air filtration through high efficiency filters (lack of corrosive particles for offshore implementation and onshore installations)

Command control skid (inside the shelter):

  • Control of fresh air flow and overpressure at 25Pa
  • Control of ATEX active safety
  • Control of protected installation safety
  • Management of possible air lock
  • In case of fire or gas alarm, automatic safety layouts arrangements
  • Local and remote alarms activation

ATEX certification in two steps (zone 1)

Shelter’s project (first step):

  • After design file approval by customer, the file is submitted to certification body for technical review

Shelter’s completion (second step):

  • Certification test preparation
  • Test procedure implementation
  • Issue of certificate of conformity by certification body

ATEX self-certification in zone two

Self-certification is done by the manufacturer, which will issue a complete file with all documents able to show the accordance with all ATEX standards.

Additional equipment for ATEX zones:

  • Air conditioning units (power adjusted to external and internal thermal intakes)
  • Fire detection and protection, volume confinement to be protected
  • Lighting, emergency lighting, sockets, etc.

Press Releases

  • SAFETYTAINER to Appear at Keymica 2014

    We are pleased to inform you that SAFETYTAINER will be attending the Keymica 2014 oil and gas and chemical industries event in Booth D7 of the Le Bourget exhibition centre in Paris on 21 and 22 of May.

  • ATEX Flat-Pack Shelters

    SAFETYTAINER has launched a new system which will allow easy handling onboard rigs or production platforms.

Address
3 Allée Alain Colas
13500 Martigues
France

Email address